V1 Gantry Wires

This chart only includes what goes into the cable chains to the gantry. It does NOT include exhaust fan, filament runout sensor, or wiring of anything at or below the bed.


Chain 250^3 300^3
X (Toolhead) 155cm 165cm
Z (Bed) 60cm 60cm

Wire Counts

Chain Signal 24AWG 20 AWG
X Hot End Heater   2
X Thermistor 2  
X Extruder Motor 4  
X Inductive Probe 3  
X Hot End Fan 2  
X Part Fan 2  
X X Endstop 2  
- Y Endstop 2